0598-8241694

TDS-3D00Four screens and channels

Product > Temperature Controller > TDS-3D00Four screens and channels

TDS-3D00Four screens and channels

Temperature Measurement and Control Instrument
shared:

I. Overview

TDS-3D000 series four screen four channel intelligent digital measurement and control instrument. The accuracy, intelligence, stability, and reliability of the instruments have reached the advanced level in China. Suitable for temperature, pressure, flow, and water level monitoring and regulation in industries such as power, metallurgy, and chemical engineering.

Features: 1. Suitable for copper, platinum resistors, thermocouples, various standard and non-standard signals.

2. By using a microcomputer chip, parameter settings and calibration can be directly performed on the panel.

3. Power failure is protected by EEPROM data, and all set parameters and working status can be permanently saved.

4. The output adopts photoelectric isolation, which overcomes the interference of the control object on the local machine and enhances the stability of the instrument.

5. Equipped with an automatic zero calibration system, changes in ambient temperature will not cause temperature zero drift in the instrument.

6. Equipped with a watchdog circuit and automatic reset function, the relay output state remains unchanged during reset.

7. The control mode and range of water level and pressure instruments can be set and changed, and the D/A automatically tracks the range.

8. Networking with the upper computer can be achieved through RS422, RS232, RS485 communication interfaces, and Modbus communication protocol.

9. TDS-3D3PC7 is used for automatic recognition of Cu50 and Pt100 signals, while TDS-3D3377 and 3D3277 are commonly used in power plants.

2、 Main technical indicators

1. Environmental temperature: -20 ℃~50 ℃, relative humidity ≤ 85%, altitude: ≤ 2000 meters

2. Working power supply: AC 220V ± 15%, 50 ± 5Hz

Switching power supply: AC 60-250V; DC 80~300V

3. Display range: 0~150 ℃ (for power plants) -50~150 ℃

4. Signal input: Four channels, (can be different signals, but must be specified when ordering)

5. Basic error: ≤± 0.5% ± 1 word

6. Display format: 4 screens: 4-digit 0.56 "LED red

7. Anti interference: Input common mode 250VAC, series mode three times the power range (AC) 50Hz interference voltage, less than the error range

8. Control settings: keyboard numeric settings. Control sensitivity: ± 1 word; Control error: ± 1 word

9. Output mode: Relay contact capacity: 220VAC, 3A

RS485 or RS422, RS232, Modbus communication function (optional)

Analog output: 0~10mA (load resistance ≤ 1.5K Ω); 0~5V (optional)

4-20mA (load resistance ≤ 750 Ω); 1-5V (optional)

10. Display mode: display "H-A" when exceeding the upper range, display "L-A" when exceeding the lower range, and display "A-A" when disconnecting

11. Power consumption: The overall power consumption of the machine is less than 5W

12. Dimensions: 160 × 80 × 130mm (plastic shell)

13. Hole size: 152 × 76mm

14. Installation type: dashboard mounted, horizontal

15. Instrument weight: 500g