18.6 HT-500E1 dehumidifier

1、 Important safety instructions

Please read all instructions before using this appliance.

1. Before use, please confirm that the power supply voltage is 22OV, 50HZ.

2. Do not unplug the power plug of the dehumidifier by pulling the power cord.

3. Do not control the operation and stop of the dehumidifier by inserting and unplugging the power plug.

4. When moving the dehumidifier, be careful not to roll or damage the wires.

5. Do not insert fingers or rod-shaped objects into the grille.

6. Do not let children climb, stand, or sit on the dehumidifier.

7. Before cleaning and repairing, be sure to unplug the dehumidifier.

Attention: We recommend that any repairs must be carried out by professionals.

8. Please make sure to use grounding.

9. Do not operate in enclosed and narrow spaces.

10. Please keep this safety instruction manual safe.

2、 Product Introduction

A dehumidifier is a machine used to reduce the air humidity in the installation space, making it suitable for people's daily life and storage of goods.

Our dehumidifier has the characteristics of beautiful appearance, compact structure, and easy operation. It is widely used in scientific research, medical and health care, commodity storage, underground engineering, as well as high humidity places such as kitchens, bathrooms, archives, and warehouses to remove moisture. It can prevent losses caused by dampness, rust, and mold on instruments, meters, telecommunications equipment, drugs, materials, etc.

When designing, due to consideration of climate and environmental changes, human physiological health conditions, and protection conditions for indoor furniture and other items, the optimal humidity setting for the space varies between 45% and 65%. Therefore, it is recommended to maintain the setting within this humidity range.

3、 Schematic diagram

4、 Instructions for use

Key Function Description:

1) On/off key: Press the on/off key to cycle the dehumidifier from power on to power off.

2) Humidity increase/decrease button: Press the increase/decrease button once to set the humidity to increase or decrease by 1%. After holding down the increase/decrease button for 1.5 seconds, the set value will continuously increase or decrease by 5 points per second.

3) Memory button: Press the memory button, the memory indicator light will turn on, activate the power-off memory function, press the memory button again, the memory light will turn off, and turn off the power-off memory function.

Power on:

1) Plug in the power and the dehumidifier makes a beep.

2) Press the "On/Off" button once, the running indicator light will turn on, the humidity display window will flash, and the set humidity from the previous operation will be displayed. The initial set humidity is 60%, and after three seconds, the humidity display window will remain on and show the current humidity.

3) Press the humidity increase or decrease button to adjust the desired humidity. When the set humidity is less than 3% of the current humidity, the dehumidifier works. When the set humidity is greater than 3% of the current humidity, the dehumidifier stops working.

4) When the set humidity is less than 30%, the dehumidifier enters continuous dehumidification mode, and the humidity display window shows "[port]".

Shut down:

Press the "On/Off" button in power on mode to stop the dehumidifier from working and all indicator lights will turn off.

Notes:

1) If the set humidity is higher than the actual humidity, the dehumidifier will not work.

2) When the water tank is full, the full water indicator light will turn on, the compressor and fan will automatically shut down, and the buzzer will beep twice. If the water in the tank is not poured out, the buzzer will beep twice every 5 minutes. Only by pouring out the water in the tank can the dehumidifier continue to operate.

3) When dehumidifying, once the compressor is started, the fan and compressor should run for at least 3 minutes before stopping. After stopping work, it must take 3 minutes for the compressor to start.

4) If working at lower temperatures, the dehumidifier will automatically determine the system temperature to achieve automatic defrosting. When defrosting, the defrost indicator light is on, the fan is working, and the compressor is automatically turned off.

5) After pressing the memory button, if there is a power outage, the controller will automatically record the current operating status. After restoring power, the dehumidifier will automatically operate in the state before the power outage.

6) The humidity can be set within the range of 30% -90%.

7) If the dehumidifier is not used for a long time, please unplug the power plug.

Continuous drainage:

Remove the water tank, use a sharp object to break the lower outlet of the water tank, and connect the drainage pipe. Install the water tank and lead the drainage pipe out of the chassis.

5、 Precautions for use

1. When moving, do not tilt the body more than 4-5 degrees. To prevent damage to the compressor.

2. The operating temperature of this machine is 5 ℃ -32 ℃.

3. When the dehumidifier is working, the room temperature will rise by 1-3 ℃ due to the heat generated by the compressor operation. This is a normal phenomenon, please use it with peace of mind.

4. When the room temperature is below 10 ℃ and the absolute humidity is relatively low, it is not necessary to use a dehumidifier.

5. The air inlet and outlet must be at least 10cm away from the wall to avoid affecting the dehumidification effect.

6. Please try to seal the working environment as much as possible to increase the dehumidification effect.

7. The accumulation of dust on the air filter screen can affect the effectiveness of the dehumidifier and even cause malfunctions. It must be cleaned regularly, at least once a month. If there is a lot of dust in the environment, it must be cleaned once a week or even a day. Pull down the front panel and clean the filter screen. When cleaning, gently tap the filter screen or use a vacuum cleaner to remove the dust on the filter screen, or put the filter screen in warm water (≤ 40 ℃ and add a small amount of neutral detergent) to wash it, rinse it with clean water, and then cool it dry.