I. Overview
The TDS-4338 digital speed signal measurement and control device is composed of a microcontroller and corresponding peripheral chips suitable for industrial automation control. It is designed specifically for hydroelectric power plants and is an industrial intelligent instrument used to measure and control the speed, speed percentage, and frequency of generator sets. In January 1995, the Fujian Provincial Economic Commission organized a provincial-level appraisal and confirmed that the product's performance was at the advanced level in China. After several improvements and enhancements in practice, it became the preferred product for monitoring the speed of generator sets.
Features:
1. There are 6/7/8 relay contact outputs, and the status of the relays is indicated by 6/7/8 LED lights on the instrument panel.
2. You can directly set and view the speed, speed percentage, frequency, maximum value, and 6/7/8 relay parameter values of the generator set.
3. The parameter values are saved by E2PROM and have power-off protection and relay self-locking functions.
4. The instrument adopts a switch power supply. Can be used for both AC and DC power supply.
Applicable: Monitoring the speed, frequency, and percentage of speed and frequency of the generator set.
3、 Main technical parameters
1. Working power supply: Switching power supply: AC/DC 100~220V; DC 48~220V; Special: DC24V
2. Environmental temperature: -20~50 ℃, relative humidity ≤ 85%; Does not contain corrosive gases; Altitude: ≤ 2000m
3. Signal frequency at rated speed: 17.5Hz, 25Hz, 50Hz, 60Hz
4. Allowable range of input signal voltage: a. Permanent magnet machine signal: 2.5~260V AC. (If it is higher than 260-450 V, please specify separately)
b. Residual voltage signal: 0.2~120V AC
5. Measurement range: a. Speed: 0.0~3000n/min; Accuracy na=N ± 0.1% ± 1 word
b、 Frequency: 0.01~100.0Hz; accuracy fa=f ± 0.1% ± 1 word
c、 Speed percentage: 0.0~200.0%; Accuracy: ± 0.1% ± 1 word
6. Output: a. Output contact capacity: Resistive load 3A/220V AC
b、 Analog output: 0~10mA load ≤ 1.5k Ω; 4~20mA load ≤ 750 Ω
d、 Communication interface output: RS485, RS422, RS232
7. Display content: Unit frequency, speed, speed percentage, and maximum frequency, speed, percentage
8. Hole size: 152 × 76mm; external dimensions: 160 × 80 × 250mm 160 × 80 × 130mm
9. Power consumption: ≤ 10W
Example of product model
TDS-4336-27、TDS-4336-16、TDS-4338-32、TDS-4338-27
