I. Overview
Application: Multi channel patrol monitoring of stator temperature, pipeline air temperature, water, oil temperature, etc. of power station generators.
Features: 1. The instrument has the function of automatic discrimination and mixed reception of Cu50 and Pt100 signals in the temperature range of -10~150 ℃.
2. Different inspection channels can be set to the same or different alarm values. Use 2-3 two position relays for alarm.
3. LED displays the measured value, sets parameters, checks the number of routes, and displays the channels that have been alarmed in a loop.
4. WATCH DOG monitoring technology is designed to prevent system crashes, with a watchdog circuit and digital filtering technology to enhance anti-interference capabilities. The set parameters will not be lost during power outages.
5. Selection of fixed-point/inspection, manual switching to any channel for fixed-point status, E2PROM data protection.
6. For the convenience of on-site debugging and use, each channel can freely perform temperature value compensation and correction.
7. Inspection can be configured and any combination of inspection channels can be used. The number of inspection routes can be set arbitrarily within the same named route of the instrument.
2、 Main technical indicators
1. Inspection routes: 4, 8, 12, 16, 20, 24, 32, 40, 48, 64, 96 routes
2. Working power supply: AC 220V ± 20%, 50Hz ± 2Hz; Switching power supply: AC/DC110~220V ± 20%
3. Working environment: Temperature range 0~50 ℃; Relative humidity ≤ 85%
4. Range: 0.0~150.0 ℃~300.0 ℃
5. Accuracy level: ± 0.5% FS ± 1 word
6. Display mode: Left 2-digit 0.56 "LED displays real-time inspection channel number
The middle 4 0.8 "LED displays the measured value,
1) 4-32 channels, opening size 152 × 76mm
The left 2 digits display the current channel number in a 0.56 "LED loop
The 0.56 "LED on the right 2 digits displays the alarm channel number in a loop
2) Hole size of 32~96 channels is 152 × 152mm
32~64 indicator lights indicate the corresponding number of alarm states, with green lights indicating HI alarm, red lights indicating HHI alarm, and orange lights indicating BL disconnection alarm
3) The display mode of 96 channels is the same as that of 4-32 channels
4) 4. 8-way square: The main screen displays the measured values, and the bottom left 2 digits show the inspection channel number; The channel displaying the alarm in a loop in the bottom right 2 digits.
7. Alarm function: The resistance breaking alarm displays that the A - A and HI lights are on, and the corresponding relay is closed for output,
Display L-A when exceeding the lower range, display H-A when exceeding the upper range, and the HHI light is on. The light is on and the corresponding relay is closed for output
8. Control settings: keyboard numeric settings; Control sensitivity: ± 1 word;
9. Contact output: 3A/220V AC
10. Inspection time: adjustable between 1.5 and 10.0 seconds per route, with a step increase or decrease of 0.1 seconds
11. Signal output: RS485, RS422 communication interface
12. Communication baud rates: 600, 1200, 2400, 4800, 9600, 19200bit/S
13. Instrument panel installation: horizontal, square
14. Power consumption: ≤ 5-15W
15. Instrument weight: ≤ 0.5~5Kg
Example of Instrument Model
TDS-04337、TDS-083277、TDS-163337、TDS-243277、TDS-323377