I. Overview
The TDS-WS3000 Temperature and Humidity Intelligent Digital Measurement and Control Instrument is a newly designed smart meter innovatively developed by our factory. The instrument's accuracy, reliability, and stability all reach advanced domestic levels.
Features:
1. Suitable for copper, platinum resistance, thermocouples, various standard and non-standard signals, and humidity signals.
2. Temperature and humidity are displayed independently. Temperature and humidity have separate signal outputs and controls
3. Equipped with a microcomputer chip, the instrument is intelligent, allowing direct parameter settings and calibration on the panel.
4. In case of power failure, EEPROM data protection is employed, ensuring that all set parameters and operating status can be permanently saved.
5. The control and output adopt photoelectric isolation, overcoming interference from the controlled object to the host machine and enhancing stability.
6. Equipped with an automatic zeroing system to overcome temperature zero drift caused by environmental temperature changes in the instrument.
7. Analog output signals such as 4-20mA automatically track the range without requiring debugging.
8. For models connected to the host computer, select RS422, 232, 485 Modbus communication interfaces or D/A output.
II. Key Technical Indicators
Display routes: 1 for temperature, 2 for humidity real-time display
2. Ambient temperature: -20°C to 50°C, relative humidity ≤85%, altitude ≤3,000 meters
3. Power supply: AC 220V±15%, 50±5Hz; Switching power supply: AC/DC 220-100V, DC 24V
4. Display range: Temperature -50 to 600°C; Humidity RH 0-100%
5. Basic Error: Temperature ≤ ±0.5% ±1 digit; Humidity ≤ ±3%
6. Display Format: Dual-screen 4-digit 0.56" LED red and green
7. Input Signals: Suitable for copper, platinum resistance, thermocouples, various standard and non-standard signals, and humidity signals
8. Anti-interference capability: When subjected to an input common-mode voltage of 250VAC and a differential-mode interference voltage three times the measurement range (AC) at 50Hz, the display
The value change is less than the basic error
9. Control Settings: Keyboard numerical input. Control Sensitivity: ±1 character; Control Error: ±1 character
10. Output Method: Relay Contact Capacity: 220VAC/3A
1) The temperature and humidity alarm can be independently configured
2) RS485 communication function (baud rates: 300, 600, 1200, 2400, 4800, 9600, 19200)
3) 2 independent analog outputs: 4-20mA (specify 0-10mA, 1-5V, or 0-5V during order placement if required)
11. Display mode: "H-A" for upper range overload, "L-A" for lower range overload, and "A-A" for thermocouple breakage
12. Power Consumption: The total power consumption of the machine shall not exceed 10W
13. External dimensions: 160×80×130mm
14. Hole dimensions: 152×76mm
15. Installation type: Dashboard-mounted, horizontal
16. Instrument weight: 700 grams