18.8 JYZ type oil gathering device

I. Overview

The pump unit of JYZ type oil collection device works with turbine oil as the working medium, with low noise and simple and convenient operation, making it an ideal oil collection device.

2、 Main technical parameters

1. Fuel tank capacity: 65L, 80L (can be customized according to user requirements)

2. Oil pump model: 2CY-1.1/14.5-1

3. Flow rate: 1.1m3/h

4. Inhalation pressure: 0.048Mpa

5. Discharge pressure: 1.45Mpa

6. Motor model: Y-100L1-4

7. Power: 2.2KW

8. Working power supply: AC380V 50Hz

3、 Model Description

4、 Introduction to Structure and Working Principle

The JYZ type oil collection device consists of an electric motor, an oil pump, an oil tank, an oil filter, an oil level gauge, etc. The entire oil pump is installed on the oil tank, with low noise and simple and convenient operation. It is suitable for collecting and leaking oil. When the oil collection reaches a certain amount, the oil pump group will pump the oil to the designated position.

The electrical control unit of JYZ type oil collection device can be set to automatic, stop, and manual working modes. When set to automatic mode, the control circuit controls the start and stop of the oil pump motor based on the oil level, achieving automatic control function without human operation; When the oil level is too high, an alarm signal is issued for maintenance purposes. When set to manual mode, the start and stop of the oil pump can be directly controlled manually.

A new type of oil-water monitoring device can be installed in the fuel tank according to user needs, which can automatically monitor the oil in the tank. Its signal accuracy and reliability have reached a new level.

5、 Final assembly drawing

1. Oil drain ball valve 2, housing 3, air filter 4, oil level indicator

5. Oil outlet 6, gear oil pump 7, liquid level gauge 8, oil filter